Printing offset

Discuss PDF Export and Print functionality of QuarkXPress 2015, 2016 & 2017, including PDF/X workflows

Printing offset

Postby PetarMakedonecot » 06 Jun 2015, 04:50

When printing duplex, the printout does not match, usually. First/second page has to be repositioned for a small amount of units. So, can you add this option to print dialog box to offset one of the pages to fit each other while printing (on paper or PDF) instead of reposition them in QXP? I saw this feature in Papyrus (text processor) and it is very usefull.
Petar Petrenko
Typesetter - Graphic Designer - Photographer - DTP Trainer
Skopje, Makedonija
User avatar
PetarMakedonecot
 
Posts: 133
Joined: 23 Apr 2015, 15:43
Location: Skopje, Makedonija

Re: Printing offset

Postby max.peter » 06 Jun 2015, 12:58

I guess this is a problem of the printer (or printer driver) and not of QuarkXPress.
Every day is a good day to learn something new.
User avatar
max.peter
 
Posts: 1538
Joined: 11 Sep 2010, 12:35
Location: Romania

Re: Printing offset

Postby MikeWenzloff » 06 Jun 2015, 13:37

Rarely will a consumer-grade printer duplex with accuracy. Second side is still off. I get better (i.e., more accurate) results manually flipping pages for sending a company a physical proof than using my Phaser's duplexing option. But as I rarely print proofs the offset doesn't bother me too much.

Which is why Petar is making the request--the ability to enter an offset so the sides will line up a bit better.

Mike
MikeWenzloff
 
Posts: 1241
Joined: 05 Jun 2013, 12:55

Re: Printing offset

Postby PetarMakedonecot » 06 Jun 2015, 14:34

@max.piter
No, it is not a problem of a printer driver. I saw this option in Papyrus, a German Office software. It is used by every printer you use but only by this software.
Petar Petrenko
Typesetter - Graphic Designer - Photographer - DTP Trainer
Skopje, Makedonija
User avatar
PetarMakedonecot
 
Posts: 133
Joined: 23 Apr 2015, 15:43
Location: Skopje, Makedonija

Re: Printing offset

Postby max.peter » 07 Jun 2015, 04:51

So, it's a software problem (other than QuarkXPress). Probably you'll get the same problem when you export to PDF and print from a PDF viewer or from Acrobat. You can check this comparing the definitions of pages included in both even and odd pages, after exporting to postscript files. You could see that is no difference. That is why the cause of the problem appears when the output from QXP is read by other software.
Quark engineers cannot customize QXP's output for every software maker. Nobody does this.
Last edited by max.peter on 07 Jun 2015, 10:04, edited 1 time in total.
Every day is a good day to learn something new.
User avatar
max.peter
 
Posts: 1538
Joined: 11 Sep 2010, 12:35
Location: Romania

Re: Printing offset

Postby PetarMakedonecot » 07 Jun 2015, 07:10

Hi Max,
it is not problem. Just an option included into Papyrus's print function. They added it to make perfect fit of both printed sides of the paper.
Petar Petrenko
Typesetter - Graphic Designer - Photographer - DTP Trainer
Skopje, Makedonija
User avatar
PetarMakedonecot
 
Posts: 133
Joined: 23 Apr 2015, 15:43
Location: Skopje, Makedonija

Re: Printing offset

Postby max.peter » 07 Jun 2015, 10:06

I guess you are right Petar.

Thank you.
Every day is a good day to learn something new.
User avatar
max.peter
 
Posts: 1538
Joined: 11 Sep 2010, 12:35
Location: Romania

Re: Printing offset

Postby PetarMakedonecot » 08 Jun 2015, 07:59

So, when all of us find it OK, it's now Quark's turn to do it. :D
Petar Petrenko
Typesetter - Graphic Designer - Photographer - DTP Trainer
Skopje, Makedonija
User avatar
PetarMakedonecot
 
Posts: 133
Joined: 23 Apr 2015, 15:43
Location: Skopje, Makedonija

Re: Printing offset

Postby A Palaniappan (Quark) » 20 Jul 2015, 04:25

Hi Peter,

Thank you contacting Quark.

I have downloaded the demo version of Papyrus and there was no option for the Duplex printing in the Print dialog.

I have attached one screenshot for the same.

Kindly provide some more info and send the files to apalaniappan@quark.com

Thanks
A. Palaniappan
Attachments
Forum.png
(163.6 KiB) Downloaded 5611 times
A Palaniappan (Quark)
Quarkian
Quarkian
 
Posts: 101
Joined: 31 Dec 1969, 19:00

Re: Printing offset

Postby shaun » 20 Jul 2015, 06:24

Demo version does not allow double-sided printing
Attachments
Duplex.png
(193.14 KiB) Downloaded 5602 times
shaun
 
Posts: 344
Joined: 14 Jan 2006, 13:12


Return to QuarkXPress 20xx: Output (Printing & PDF Export)

Who is online

Users browsing this forum: No registered users and 1 guest

cron